- Description
Description
HORIZONTAL AXIS WIND GENERATORS
500W Wind Turbine Generator — 3-Blade Horizontal Axis | 12V
Put low, steady wind to work. This 500W horizontal-axis wind turbine generator pairs a 3-blade fiberglass-nylon rotor with a 3-phase AC permanent magnet synchronous generator, giving you a compact, budget-friendly entry point into DIY wind power for a home, cabin, farm, or RV. An included anemometer lets you confirm your site's wind speed before you commit to a mounting location, and the adjustable MPPT controller keeps energy conversion efficient as conditions change.
| 500W Rated Power | 12V System Voltage | 3 Blades | 55dB Noise Level |
Built for Easy DIY Installation
WHY THIS TURBINE
- Low start-up threshold — begins generating at a minimum wind speed of just 2.5 m/s, with a 12 m/s rated wind speed for peak output.
- 3-phase AC permanent magnet synchronous generator — efficient energy conversion with minimal maintenance and no brushes to wear out.
- Reinforced fiberglass-nylon blades — rated for a -40°C to 80°C operating range, so the blades resist freezing in cold climates and deformation in heat.
- Included anemometer — measure your site's actual wind speed before final mounting to confirm the location will perform.
- Adjustable MPPT controller — optimizes energy conversion for stable power output as wind conditions change.
- Heat-resistant Teflon wiring — protects internal wiring from damage during overload conditions.
- Quiet operation — rated at just 55dB, suitable for residential settings.
Best For
IDEAL APPLICATIONS
- Small homes, cabins, and detached workshops on a 12V system
- RVs, boats, and mobile off-grid setups
- Farms and rural outbuildings needing supplemental power
- DIY off-grid or hybrid solar+wind starter systems
- Sites with consistent light-to-moderate wind exposure
Technical Specifications
FULL SPECS
| Generator Specifications | |
| Rated Power | 500W |
| System Voltage | 12V |
| Turbine Type | Horizontal Axis Wind Turbine (HAWT) |
| Generator Type | 3-Phase AC Permanent Magnet Synchronous Generator |
| Number of Blades | 3 |
| Blade Material | Reinforced fiberglass nylon |
| Wind Performance | |
| Start-Up Wind Speed | 2.5 m/s |
| Rated Wind Speed | 12 m/s |
| Noise Level | 55dB |
| Build & Environment | |
| Operating Temperature | -40°C to 80°C |
| Wiring | Heat-resistant Teflon-coated wire |
| Mounting | Pole not included |
What's in the Box
IN THE PACKAGE
- 1x 500W Wind Turbine Generator with 3-blade rotor
- 1x Adjustable MPPT Controller
- 1x Anemometer
- Mounting hardware and installation accessories
- User manual